Error codes dishwashers Flavia

We have collected all the error codes of Flavia dishwashers with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.

The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.

Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.

Flavia dishwashers errors, decoding

Error code Description Causes and solution
E1 Fluid fill problem.Check: 1. Whether the water drain system is clogged. 2. Absence of a crease (kink) of the water inlet tubes. 3. Availability of central water supply.
E3 Insufficient water heating.The water in the drum does not heat up to the correct temperature. The heating element and the water heating sensor are subjected to testing.
E4 The water level has been exceeded.In this case, check: 1. Door seals. 2. Correct installation of equipment relative to the level. 3. No excess foam.
E8 Inlet valve not working properly.1. Check the correct connection of the filling tube, 2. Clean the filling filters. 3. Make sure there are no kinks in the water supply pipes.
E9 Button sticking.The button was pressed for more than 30 seconds. The problem is related to the ingress of water on the contacts of the button or sticking in it.
Ed There is no communication with the display.The physical connection between the main control board and the display is broken. It is necessary to find and eliminate an open in the circuit and check the health of the display.