Error codes refrigerators Electrolux

We have collected all the error codes of Electrolux refrigerators with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.

The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.

Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.

Electrolux refrigerators errors, decoding

Error code Description Causes and solution
F1 The thermostat is malfunctioning or does not work at all.Need a complete diagnosis of the thermostat. Problems in operation can be caused by burned contacts or broken circuit.
F2 The temperature is not regulated, the equipment does not cool.Call a service worker. Diagnostics of contacts, thermostat and its components, replacement of faulty parts is required.
F3 NTC sensor defective.Most likely, the contacts on the switch have come off or the sensor has burned out. We need the services of a service center for the repair of equipment diagnostics.
F4 The temperature sensor is not working.It is necessary to check the contacts of the connection to the switch, whether the sensor has burned out. Perhaps you need to tighten the contacts. Contact the service center.
F5 The thermal sensor is out of order.If the temperature sensor breaks down, contact the service department. The master will ring the entire network, tighten the contacts, and replace the sensor if necessary.
The "-" symbol is flashing The temperature is below the permissible level (<0 С).The evaporator is working problem. Due to false sensor readings, the compressor is continuously cooling. Malfunctions are eliminated at the service center.
The symbol "-" is lit Temperature is higher than permissible (> +9 C).Evaporator defective and possible refrigerant leakage. Call the master, he will inspect the equipment, eliminate the freon leak, replace the sensor if it is faulty.
Sign "b" Freon leak.Call a specialist from the service. It is necessary to very quickly find the place of the leak and eliminate it, and also to top up with refrigerant.
Sign "c" is lit The thermal sensor is out of order and needs to be replaced.In the event of this malfunction, you need to call a service and repair team to replace the sensor and its components.
Flashing "d" The thermistor came out of standing.Only a service center can diagnose the exact cause of the breakdown and eliminate the malfunction. Contact a specialist for repair and replacement of the resistor.
"O" flashes continuously The evaporator sensor for the freezer compartment has failed.The service center will be able to eliminate the breakdown and replace the evaporator, sensor and components.
Place for your advertisement. Information about advertising on this site. To read