Error codes dishwashers Fagor

We have collected all the error codes of Fagor dishwashers with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.

The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.

Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.

Fagor dishwashers errors, decoding

Error code Description Causes and solution
F1 The functionality of the door is broken.1. Check the tightness of the door closing, the integrity of the sealing gum. 2. The Aquastop protection system has worked.
F2 Excess bay time.Slow filling of water due to: 1. Bent or leaking fill/drain pipes. 2. Insufficient pressure of the central water supply.
F3 Drain timeout.Water is slowly drained from the hopper due to possible creases in the pipes of the drain system, or their clogging from the inside with foreign objects.
F4 Overflow with water.Water is drawn into the bunker above the set limit. It is necessary to check the serviceability of the water level meter, replace it with a new part.
F5 Overheating detected.There was an overheating of the liquid in the bunker. A possible cause of the malfunction is incorrect readings of the temperature sensor or a break in communication with it.
F6 Heating problem.The water does not heat up to the desired temperature. In most cases, the malfunction is the failure of the heating element.
F7 Short circuit of the temperature sensor.It is necessary to check the health of the circuit from the sensor to the main control unit. Also, check the temperature sensor.
F8 Water level sensor failure.It is necessary to check the communication circuit of the main control unit with the pressure switch and their serviceability. Additionally, make sure there are no leaks.
F9 Problem with water supply control.In most cases, the switch responsible for controlling the water supply to the hopper is faulty. The defective part must be replaced.
F0 Control unit defective.The main control board has failed or has malfunctioned. The control unit needs diagnostics in a service center.