Error codes refrigerators Samsung

We have collected all the error codes of Samsung refrigerators with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.

The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.

Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.

Samsung refrigerators errors, decoding

Error codes refrigerators Samsung (No Frost)

Error code Description Causes and solution
01 Notifies about problems with the operation of the icemaker.Signals on devices with an icemaker. Indicates connection violations. Diagnostics of the entire system is recommended.
02 Incorrect operation of the refrigerator compartment sensor.Examine the contacts, try to tighten them. If you cannot solve the situation on your own, use the services of the service.
03 Defrosting problems.Need to replace the loop and inspect the defrosting system. Due to a short circuit in the network, the wiring could be short-circuited. The service center will be able to eliminate the breakdown.
04 The cooler is broken.In Know Frost, the cooler is faulty, so the equipment does not cool the food. It is useless to operate the device, we recommend that you contact the service center for help.
05 The ice maker does not work properly.After the third failure, a complete replacement of the ice-making system and renewal of contacts is recommended. Contact a service technician.
06 Cool Select Zone is out of order.Diagnostics of sensors, ringing of contacts. It is necessary to replace the failed components. The work is carried out by a refrigeration equipment repairman.
07 The temperature sensor has failed.The sensor does not work, or the board. Perhaps the wiring between them is broken. All problems are eliminated by refrigeration service specialists.
08 The freezer compartment sensor has stopped giving operation signals.The device does not work stably. Temperature conditions are constantly violated. Inspection by a service master is recommended.
09 Defrost system problems.Contact the service. We need diagnostics with special tools to identify the exact cause of the breakdown. After that, you can easily replace the burnt out part.
10 The freezer cooler is not working.Icing of the blades, natural wear and tear, burnout of contacts are the causes of breakdown. In the first case, lower the temperature, defrost the device.
11 The condenser fan is not working.If the condenser is located on the outside, clean the cooler from dust. Contact service and call a specialist to replace the component.

Error codes refrigerators Samsung (Side By Side)

Error code Description Causes and solution
R5 The refrigerator compartment thermal sensor has failed.Call the service wizard. In addition to replacing defective parts, it is necessary to establish the cause of the breakdown, to exclude the possibility of repetition.
02 The thermal sensor has failed.The heat switch needs to be replaced. The masters from the service will also pull up contacts. Install a voltage stabilizer as protection against burnouts.
DS The temperature sensor is not functioning correctly.The cause of the breakdown could be the wear of the loop, damage to the sensor. A person from a service company can restore the operation of the device.
09 The heat sensor has stopped working.The thermosensor needs to be replaced with a new similar one. Contact the service center, describe the model of the device - the master will come and do all the work.
F5 The sensor in the freezer is defective.The freezer compartment sensor needs to be replaced. Wear and burnout of contacts is a small part of the causes of a malfunction. Contact the service.
08 Malfunction of the temperature switch in the freezer compartment.The switch could have failed due to power surges or weak contacts. Call the wizard from the service.
E5 The ambient thermal sensor has failed.Replace the switch, tighten the contacts. Call the equipment repair company, call a specialist to eliminate the malfunction.
07 External thermal sensor defective.The external sensor fails due to large deviations from the permissible temperatures. The repair technician will determine the cause of the malfunction and eliminate it.
RD Air damper problems.Visually inspect the valve for cracks or any defects. Most likely it is necessary to remove the broken part and install a new one.
DD Refrigeration wiring problems.Call the master and ring all the wiring, tighten the contacts, replace the burned out elements. The cause of the breakdown is a short circuit in the network.