Error codes induction cookers Gemlux

We have collected all the error codes of Gemlux induction cookers with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.

The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.

Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.

Gemlux induction cookers errors, decoding

Error code Description Causes and solution
E0 Blown electrical circuits.It is necessary to check the serviceability and integrity of the internal circuit, the winding may be open. Contact the service center.
E1 Problems with the dishes.Just replace the dishes, this is not a breakdown of the hob. Also use cookware with a flat bottom and ferromagnetic coating. Pots and pans should have a smooth, even bottom.
E2 Overheat protection active.It works if you put an empty dish on the burner. This is not considered a malfunction, just follow the operating rules. We recommend checking the ventilation clearances.
E3 The problem is due to high voltage.Turn the hob off and on again, check the mains voltage, you may need a stabilizer. If the problem remains, you need to replace the inverter, contact the service center.
E4 The problem is due to low voltage.Due to the low voltage, the induction panel gives malfunctions, poorly heats the burners. It is necessary to disconnect and reconnect the hob to the network, call an electrician to the house.
E5 The work surface sensor has failed.Touch buttons may not respond due to stains of grease and spillage of water on the ceramics - wipe the surface. Contact a service center for diagnostics and repair of the sensor and its components.
E6 The bipolar transistor does not work.In this case, it is not possible to fix the problem yourself. Do not use the device, we recommend urgently contacting the service and repair service.
E7 Overheated work surface.Check if the cooking utensils are on the cooking zone. Turn off the hob until it cools completely, cook at less power.