Error codes induction cookers Samsung

We have collected all the error codes of Samsung induction cookers with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.

The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.

Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.

Samsung induction cookers errors, decoding

Error code	Description	Causes and solution
SE	Sensor short circuit.	In most cases, the problem is due to liquid getting on the hob. Dry the ceramic glass.
BY OVERHEATING	Blown internal components of the hob.	Turn off the device until it cools completely. Reset all settings by holding the on / off key for 4 seconds.
PAN DETECTION	Use of unsuitable cookware.	The diameter of the bottom of the dishes should be equal to the diameter of the burner. Cooking is necessary exclusively in dishes with a ferromagnetic alloy and a flat bottom.
LE	Weak mains voltage at the induction cooker Samsung.	The device slowly heats up, which makes cooking difficult. Switch off and reconnect the hob. You may need to install a voltage regulator.
FL	Overheating of the hob due to breakdown of the cooler.	If the fan does not work when the hob is turned on (noise is not heard), then it is broken or dirty. Contact the service center for repair / replacement of the fan.