We have collected all the error codes of Brandt refrigerators with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.
The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.
Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.
Error code | Description | Causes and solution |
---|---|---|
d01 | Motor / compressor does not start. | Failure can be caused by malfunctioning of the capacitor or starting relay. The thermostat may be damaged. Call the wizard from the service department. |
d02 | Operating temperature not maintained. | In this case, the thermostat or its components are damaged. Contact the service department, it is necessary to diagnose the device by a master and replace parts. |
d03 | The Brandt refrigerator thermostat is malfunctioning. | The contacts may have burned out or the part needs to be replaced completely. The problem cannot be fixed on your own, Call the wizard from the service center. |
d04 | The motor-compressor does not work. | The starting relay or the compressor itself is malfunctioning. Turn off the device, call a specialist from the service center for diagnostics and repair. |
d07 | The sensor reacted to the open door. | The doors were closed badly or the limit switch is faulty. Try to close the door more tightly, if the sensor works - call a specialist. |
d17 | Temperature sensors do not work or show incorrectly. | The failure is caused by a defect in the module itself. Temperature sensors need replacement. Call a specialist from the service center. |
d21 | The Brandt refrigerator control module has failed. | The module does not work well due to problems with the ribbon cable connecting it to the board. It is necessary to call service specialists to diagnose the module and its components. |