We have collected all the error codes of Nord refrigerators with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.
The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.
Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.
|Error code||Description||Causes and solution|
|F1||Failure to maintain a stable temperature in the refrigerator / freezer compartment.||Contact the service, problems may be associated with an electric heater, defroster, thermostat.|
|F2||The temperature is not maintained.||Inspect the refrigerant pipe for leaks. If freon leaks out, the services of a repairman are needed to replace the tube and refuel.|
|F3||Stable temperature is not maintained.||Depending on the model, the thermostat or electric heater may fail. Call a specialist from the service center to diagnose the equipment.|
|F4||Network problems.||The mains voltage is critically low (less than 170 V). Therefore, the cameras are not cooled, and the motor stalls. The recommendation is to purchase a stabilizer and check the wiring in the house.|
|F5||Unstable network.||Critically high voltage (above 255V). We recommend buying a mains voltage regulator, there may be problems with the wiring in the room.|
|F6||Compressor or motor problems.||Capacitor or commissioning relay not working. You can contact a service company for the repair of refrigeration equipment to fix the breakdown.|
|F7||The compressor / motor is out of order.||The control module needs to be replaced. Service technicians should inspect components, from the thermostat to the motor, to prevent burnout of parts.|