We have collected all the error codes of Indesit refrigerators with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.
The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.
Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.
| Error code | Description | Causes and solution |
|---|---|---|
| F01 | The starting relay is out of order. | Inspect the equipment for a smell of fused plastic? Maybe the wiring or board is burned out. Contact a specialist from the repair service. |
| F02 | There is no communication with the starting relay. | Due to the fact that the relay does not work, the equipment does not work. Problem with compressor or control board. You can eliminate the breakdown at the service center. |
| F03 | The control panel does not turn on. | There can be two reasons: the board burned out or the contacts suitable for it were oxidized. Disconnect the device from the power supply and wait for the arrival of the repair team. |
| F04 | The freezer fan is not working. | The cooler could break due to a short circuit in the network. Natural wear and tear cannot be ruled out either. The fan can be replaced with a new one at the service center. |
| F05 | The control panel crashed. | The damper does not work. We recommend that you visually inspect the connection point of the damper. Contact a service representative for repair and replacement parts. |
| F06 | The thyristor is damaged. | Defrosting system malfunctioning. The service center representative can check it. Call the technician to fix the malfunction of the electric heater. |
| F07 | The defrost system malfunctions or does not work at all. | The problem may arise from a burned out electric heater or distribution box. Call service. |
| F08 | Violations when connecting the solenoid valve. | You can reconnect again by calling a service technician. He will conduct an inspection, eliminate violations. |
| F09 | Software malfunction. | Contact a service company to replace the board. We recommend that you carry out diagnostics of equipment to check all systems in the same service. |
| F10 | Know Frost damper defective. CCZ - solenoid valve burned out. | For Know Frost: tighten the damper contacts and wires. For CCZ, it is recommended to check the connectors and replace the compressor. |
| F11 | Freezer cooler not working on NF models. | Cooling does not work, ice collects on one wall, food does not freeze. An inspection by a service master and replacement of the cooler is required. |
| F12 | The display is not responding. | Nothing is shown on the display. Examine it for chips, cracks. Call a specialist from the service, he will replace the boards, clean the contacts and tighten them. |
| F13 | Fridge fan defective in NF units. | Resistance in contacts is broken, natural wear of parts is possible. Contact service to repair the unit. |
| F14 | The control does not work. | A control problem occurs when a module fails. A complete replacement of the part and the adjacent contacts is required. Contact the service center staff. |
| F15 | Short circuit in the Multiflow system. | Heater thyristor shorted. Turn off the device, let it stand for 5-10 minutes, turn it on. If the code reappears on the display, call the repairman. |
| F16 | 1) In devices with static cooling, the cooler failed. 2) The Multiflow heater is faulty in No Frost. | In the first case, replace the fan. In the second, check the heating element. |
| F17 | The vacuum pump is not working. | Call the foreman to ring the contacts and inspect the deposit. A specialist from the service will be able to quickly eliminate the breakdown, replace the pump. |
| F18 | The AQUA CARE 2 valve is broken. | The valve and its connections were damaged. A service worker will check the device, exclude / confirm a factory defect. Call for service. |
| F20 | The light does not come on when the door is opened. | Light bulb burned out. Buy a new one of the same model and install. If you can't do it yourself - order the services of a repairman. |
| F21 | NTC temperature sensor defective. | Disconnect the equipment from the power supply, contact the service company. An urgent need to carry out a full check of the modules and establish the presence of other breakdowns. |
| F22 | NTC (temperature sensor) violations. | The repair of the thermistor and the ringing of the connections can be carried out by a specialist of the service center. Before the arrival of a specialist from the service, do not turn on the equipment. |
| F23 | The evaporator is broken. | A malfunction of the evaporator provoked a departure of contacts, burnout of sensors, breakdown of insulation. Call the service center for diagnostics and repair of equipment. |
| F24 | The freezer does not work. | Thermistor burned out, NTC replacement and freezer diagnostics are required. Call repair service to eliminate the problem. |
| F25 | The evaporator is not functioning. | Most often, a thermistor fails in evaporators. Just call a service technician to inspect it and replace broken components. |
| F26 | The air sensor does not respond. | No uniform cooling, no air circulating in the chamber. We recommend unloading the refrigerating and freezing chambers and calling them home to inspect the equipment. |