Error codes refrigerators Liebherr

We have collected all the error codes of Liebherr refrigerators with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.

The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.

Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.

Liebherr refrigerators errors, decoding

Error code Description Causes and solution
F0 Defective sensor in Bio Fresh compartment.Call a refrigeration technician to replace the sensor. Before the arrival of the master, unload the products from the refrigerator compartment.
F1 The refrigerator compartment air sensor has failed.The temperature is not kept. A service specialist inspects the sensor and contacts. Replace defective parts if necessary.
F2 Freezer evaporator problems.The freezer is freezing food because the board does not recognize the incoming signals. The evaporator needs to be replaced, call a repair technician.
F3 The air sensor in the freezer compartment is not working correctly.The foreman from the service must inspect the sensors for defects, ring the contacts and replace the failed components.
F4 The evaporator in the freezer is defective.Stable temperature in the chamber is not maintained. The evaporator must be replaced with a new one. Contact the service center and call the wizard.
F5 The electronic board is out of order.Invite a specialist to dial the board with the multimeter. It needs to be replaced with a new one, so disconnect the equipment from the network and wait for the arrival of the master.
F6 Open circuit between compressors.The employees of the service and repair company for servicing refrigeration equipment will help diagnose the broken link and eliminate the breakdown.
F7 The device is in test mode.Wait until the equipment is checked for functionality. The test mode turns off on its own, do nothing.