Error codes refrigerators Miele

We have collected all the error codes of Miele refrigerators with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.

The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.

Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.

Miele refrigerators errors, decoding

Error code	Description	Causes and solution
F0	Bio Fresh sensor works with violations.	It is necessary to inspect the supply air sensor and ring the contacts that fit it. Contact the service center.
F1	The refrigerator compartment sensor is not working correctly.	The cause of the malfunction can be determined at the service center. Call a repair technician to diagnose and replace non-working components.
F2	Violations of the temperature regime of the freezer compartment.	We recommend calling the foreman to inspect the evaporator. Most likely it has burned out and needs to be replaced with a new one.
F3	There is no signal from the freezer sensor.	Loose contacts may be the cause of breakage. Possible malfunction of the switch itself. Contact service to eliminate the problem.
F4	Evaporator sensor is out of order.	Sensor malfunctions are caused by a board malfunction. It is impossible to resolve the issue on your own, it is better to call a specialist from the service center.
F5	The control board does not work.	Critical situation. Disconnect the equipment from the power supply immediately and call the service. We urgently need diagnostics and replacement of the board by a specialist.
E1	Thermal sensor defective.	A short circuit in the network caused the heat switches to burn out. Contact the service center for the services of a repairman.
E2	Malfunction of the compressor and evaporator.	Serious damage that can cause the motor to burn out. You urgently need to call a master from a service and repair company.
E3	Air flow failure in the refrigeration device.	If the fan breaks down, the flow of cooled air is not distributed. The cooler needs to be replaced with a new one at a service company.
E4	Air currents are unevenly distributed.	The cooler does not function, most likely it has burned out due to a short circuit or unstable voltage. Install the stabilizer and replace the fan.
E5	The evaporator cooler is not functioning.	The wall is freezing, the food is not cooled. Contact a service technician to inspect the refrigeration equipment and replace the fan with a new one.
E6	Emergency door opening.	Press the doors more tightly, inspect the seal, its integrity may be broken or it moves away from the door. Replace with a new one if necessary.
E7	Fuses or starter relay blown.	Wait for the arrival of an employee of the service company. Diagnostics, ringing of contacts, replacement of burnt-out components are required.
E8	The timer has failed.	You will not be able to eliminate the malfunction yourself. Wait for the arrival of a repair specialist to replace the faulty timer.
NA	The temperature in the freezer is unacceptable.	Disconnect the device from the power supply, unload and contact a refrigeration repair service.