Error codes refrigerators Zanussi

We have collected all the error codes of Zanussi refrigerators with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.

The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.

Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.

Zanussi refrigerators errors, decoding

Error code	Description	Causes and solution
F1	The unit thermostat has failed.	Recommendation: call a repair specialist from the service. The device needs repair / replacement of faulty components.
F2	Problems with the thermostat.	A refrigeration repair specialist will be able to diagnose the problem and eliminate the breakdown. Contact the service center.
F3	Temperature sensor defective.	Ringing the contacts and inspecting the sensor will help to find out the exact cause of the malfunction. The service center employee will be able to eliminate all problems.
F4	Breakage of the NTC sensor.	The temperature sensor has burned out due to a short circuit. We need the services of a repair specialist to replace it with a new one. We recommend carrying out a routine inspection of the unit.
F5	NTC needs to be replaced.	Contact a professional to measure the resistance in NTC. If it deviates from the norm, the part, its components will be replaced, the contacts will be tightened.
The "-" symbol flashes	The temperature in the refrigerator compartment is too low.	The temperature has been set incorrectly and the food is being frozen. Reduce the temperature. If there are no improvements, contact the service center.
The symbol "-" is lit	Warming in the refrigerator compartment.	The door is not closed securely, push it down. Inspect the rubber seal for damage. If you find tears or cracks, replace with a new one.
The "o" symbol is on	A stable temperature in the unit is not maintained.	Serious problem. Disconnect and unload the device from food, contact the service center.
E1	A sensor in the freezer compartment has failed.	We need the services of a repair technician for refrigeration equipment. He will inspect the modules, as well as replace defective parts.
E2	Evaporator sensor problems.	Replace the evaporator sensor. We do not recommend trying to repair the old one, as problems with the evaporator lead to overheating of the equipment.
A2	Temperature problems.	Unstable temperatures lead to rapid wear of equipment. Contact the service. Disconnect and unload the device from provisions before the arrival of a specialist.
EH0	Sudden power surges in the network.	Disturbances in the electrical network are caused by outdated wiring. There may be an inappropriate power source. Call the foreman to inspect and eliminate the problem.
EH1	Voltage is unstable.	Electrical interruptions lead to power surges. The technique may not start. Turn off the power before the voltage returns to normal, purchase a stabilizer.
EH2	Outliers in the network.	Turn off the refrigeration equipment until the situation stabilizes. Pay attention to the meter and its indicators, you may have wiring problems.
EH3	Strong power surges were recorded.	Install the stabilizer. Insulation breakdown and other unpleasant problems due to surges are repaired by a master. Call him in for repair.
EHF	Refrigeration wiring defective.	Check the outlet for damage, inspect the wire for pinching. Call a specialist for diagnostics / repair of equipment.
E90	Electrical components malfunctioned.	Inspection of the electronic unit and its contacts is recommended. A specialist will diagnose with special tools and replace defective elements.
F6	The cause of the breakdown is related to the power supply.	The defrosting system has malfunctioned as a result of a short circuit. Disconnect the unit from the network and wait for the arrival of the master from the service center.
F7	The door is not closed securely.	No problem, just press the door tighter. The recommendation is to check the sealing gum for integrity. Most likely it needs to be replaced.
F8	The defrost system has failed.	Defrosting equipment is required. The evaporator does not work due to the accumulation of ice on the walls. If no improvement is found, you should invite the wizard.
P	The exact cause of the breakdown has not been established.	To fix it, you need to contact the service center master. Before arrival, do not operate the equipment, disconnect from the mains and unload from the products.