We have collected all the error codes of ASKO refrigerators with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.
The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.
Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.
|Error code||Description||Causes and solution|
|E01||Unit drive motor is intermittent.||The refrigeration unit is running “worn out” or standing on an uneven surface. Check the position of the device on the floor and reduce the load.|
|E02||Fan failure.||Intensive operation leads to rapid wear, the reason for this is the ingress of warm air, since the door is not tightly closed|
|E03||The sensor that controls the temperature regime of the freezer and refrigerator chambers is out of order.||Breakdown of compressor valves, incorrect operation of equipment that is responsible for defrosting the installation, freezing of frost|
|E04||Breakage of the temperature sensor of the chambers: freezing, refrigerating.||Compressor valves are out of order, equipment that is responsible for icing the surface and thawing of the device does not work well|
|E05||Temperature meters of the freezer and ASKO refrigerator compartment do not respond to signals.||Indicates a breakdown of the compressor valves, which are responsible for evaporation, icing and defrosting of the unit.|
|E06||Failure of the motor-compressor.||Self-powered shutdown, turning on the equipment, no cooling is performed. Check the working order of the cooling system of the device.|