We have collected all the error codes of Bosch refrigerators with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.
The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.
Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.
|Error code||Description||Causes and solution|
|E1||The temperature sensor connected to the refrigerator compartment is faulty.||Check the integrity of the wiring. Breakage is provoked by damage to the loop. You need to call a service worker.|
|R1||The refrigerator compartment sensor is not working.||If ice and snow begins to appear on the walls of the refrigerator compartment, contact the service center immediately. It is necessary to diagnose equipment and replace the sensor.|
|E2||The refrigerator Bosch compartment evaporator sensor has failed.||The problem may arise due to loose contacts, burnout. Contact the repair service and call the technician.|
|E3||The temperature sensor connected to the refrigerator compartment is faulty.||Check the integrity of the wiring. Breakage is provoked by damage to the loop. You need to call a service worker.|
|F1||The freezer compartment sensor is out of order.||It is possible that the connection to the control board is broken or it is completely out of order. Call the repair team to fix the breakdown.|
|E4||Freezer compartment condensate touch switch broken.||Check the contacts - try to inspect the device and establish a connection. Contact a specialist from the service.|
|PT||Damage to the electronic module.||Inspect the equipment for traces of burned contacts, perhaps there is a characteristic smell. Disconnect the device from the mains, wait for the arrival of the repair service.|
|D1||Broken sensor on the edge.||Faced with such a problem, immediately unplug the outlet from the power supply, unload the freezer and refrigerator, call a service worker for repair.|
|DR||The Bosch refrigerator door is not closed.||Try to press the door tighter. Check the seal for integrity, see the hinges for sagging. You may also need to line up the refrigeration equipment.|
|DF||Freezer door open / close switch does not operate.||Press the door tighter, tighten the hinges. The problem may be in the wear of the sealing cutter - replace it.|
|EF||The solenoid valve has failed.||It is impossible to eliminate the malfunction yourself. Call the service. Clean the cameras from products and wait for the arrival of the master to replace faulty parts.|
|ET||The horizontal switch does not work.||Shift lever burned out. Call a service technician to replace a faulty switch. The device does not need to be disconnected from the network.|
|EC||On / off button stuck.||Inspect the button, most likely dirt has accumulated, wipe with a cotton pad with alcohol, clean around the edge with a toothpick. Call a service worker to replace the button.|
|ES||Ice / water switch breakage.||Call a specialist from the service center. He should inspect the condition of the contacts and switch. If necessary, the wizard will replace the defective components.|
|EA||Freezer motor does not start.||Repair / replacement / diagnostics of the motor is carried out by a service worker. You can call it up and unload the refrigerator and freezer.|
|EG||The inlet valve is defective.||If the valve that regulates the water supply to the generator does not work, it needs to be replaced. Did you notice the damage? - call a repair specialist.|