Error codes refrigerators Atlant

We have collected all the error codes of Atlant refrigerators with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.

The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.

Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.

Atlant refrigerators errors, decoding

Error code Description Causes and solution
F1 The air sensor is out of order.The connection of the contacts is broken or the part is burned out, you need to call the wizard and diagnose. The sensor may need to be replaced.
F2 Evaporator sensor not responding.Contacts are broken and they need to be tightened. Perhaps the problem is in the loop or the switch itself is burned out. Contact service for diagnostics and repair.
F3 The freezer compartment sensor is not working.Contact the service center. Need diagnostics of contacts, replacement of parts. Before the arrival of specialists, turn off the equipment and unload.
F4 Weak voltage in the network (below 170 volts) of the Atlant refrigerator.For full operation, we recommend installing a voltage stabilizer. Problems with indoor wiring are not excluded.
F5 The mains voltage is too high (more than 260 volts).A voltage regulator will help to correct the voltage situation. We also recommend checking the wiring in the house.
F6 Motor malfunction.The refrigeration equipment motor does not start, the starter relay is out of order. Dismantle it and switch on the unit again. If the engine does not start, contact the service.
F7 The compressor in the Atlant refrigerator does not work.Check the refrigerant pipe for integrity. A breakdown often disrupts compressor operation Contact a service center for diagnosis / repair.
Flashing L The temperature regime in the freezer is violated.Very low temperature, increase according to the instructions for use. If damage persists, call a repair technician.
Flashing H The temperature range of the Atlant refrigerator has been exceeded.Measure the temperature with an alcohol thermometer to make sure that the temperature sensors are working. Reduce the temperature setting within normal limits / defrost the unit.
Place for your advertisement. Information about advertising on this site. To read