We have collected all the error codes of Ardo refrigerators with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.
The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.
Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.
|F1||The compressor is out of order. Verify that this item is working properly. Additionally inspect the thermostat.|
|F2||Malfunction or complete failure of the thermostat. It is necessary to check it and the temperature sensor for operability. In case of breakage, replace the part with a new one.|
|F3||The temperature sensor is broken. A broken sensor needs to be replaced; if it is OK, check the fan.|
|F4||Fixed problems with the fan. Before installing a new fan, check for damage to the currently installed fan.|
|F5||A large accumulation of water was detected in the system. Wizard intervention required. Contact the service center for the repair of household appliances.|
|F6||Failure or errors in the operation of the electronic module. It is necessary to diagnose the element. If a malfunction is detected, replace it with a working one.|
|F9||An electronics failure has been detected. Perhaps due to a breakdown in the wiring of the refrigerator or high / low voltage in the power supply.|
|F12||The electronic module has been damaged. To replace an item, a wizard call is required. Contact your nearest service center.|
|F13||The control module is broken. His diagnosis is required. Replacement with a new one in case of breakage.|
|F14||Malfunction or complete failure of the control module. Need to install a working MU. First inspect and make sure that there is a complete breakdown that cannot be repaired.|