Error codes vacuum cleaner robots iClebo

We have collected all the error codes of iClebo vacuum cleaner robots with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.

The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.

Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.

iClebo vacuum cleaner robots errors, decoding

Error code Description Causes and solution
C1 One of the wheels does not touch the movement surface. Place the device on a flat surface (floor), activate it to check the operation. If the problem is not resolved, look at the wheels.
C2 The fall sensor is out of order. It is necessary to place the device on the floor (flat surface), turn it on, check whether the problem is solved. All wheels must be on the same level.
C3 The dust collector is out of order or is full. Inspect the item; it must be securely installed. Clean it and reinstall.
C4 Wheel overload detected. The wheels operate in high load mode. Most likely due to the accumulated debris, hair, threads on them. Clean and restart the appliance.
C5 Incorrect operation of cleaning brushes. This is most likely caused by the accumulation of jammed debris in the brushes. It is required to clean the element from dirt, debris. After that, you can return the device to its work.
C6 Suction module malfunctioning. Inspect the item for clogging. It is necessary to clean the module, dust collector, filter (Replace with a new one if necessary).
C7 An internal system or navigation module has failed. Turn off the machine by pressing the Off key. After that, turn it on by pressing the On button. If the reboot did not help, contact a service center for system diagnostics and repairs.
C8 Damage to the odometer of the front wheel or it does not touch on its working surface. Inspect and if necessary, remove the front rollers, the location of the magnetic disk on their axis should be indented outward. Clean the wheels, replace if they are damaged. If the odometer breaks, contact a service center.
CA The navigation module or internal system has failed. To solve the problem yourself, try rebooting the device using the Off and On buttons. If that doesn’t help, contact your repair technician.