Error codes vacuum cleaner robots Panda

We have collected all the error codes of Panda vacuum cleaner robots with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.

The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.

Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.

Panda vacuum cleaner robots errors, decoding

Error code Description
E000 There are no breakdowns of mechanisms. In order to remove the message from the screen you need to turn off and turn on the device.
E001 The fault is due to the left height sensor. Clean it with a dry cloth or rag for proper operation.
E002 The upper left height meter does not work. It is required to clean it of dust for smooth operation.
E004 Something is wrong with the right height sensor of the device. It must be wiped using only a dry cloth or rag.
E008 The right device height meter does not work correctly. Inspect for obstructions such as dust, hair, and other debris.
E00F All sensors responsible for determining the height of the position of the device have failed. Take a dry cloth and wipe them to remove debris.
E010 The infrared sensor on the left side is out of order. Needs cleaning with a damp cloth.
E020 The right infrared sensor is intermittent. Maybe it’s just clogged and it’s easy to fix.
E040 The infrared sensor on the left side of the device is out of order. Wipe it with a damp cloth and check that it is working properly.
E080 The right (IR) infrared sensor does not transmit signals. Inspect the element, clean it from dirt, and carry out a diagnosis.
E0F0 All IR (infrared) sensors are out of order. It is necessary to clean them of dirt, saws, hair, threads. After that, start and check if they work properly.
E100 The left collision lock failed. Inspect the protective bumper, replace the item with a new one.
E200 The collision lock on the right side of the device is defective. Perform a diagnostic test before replacing with a new item.
E400 Fixed the lack of contact of the left wheel with the floor surface. Place the unit correctly on a flat surface to correct a malfunction.
E800 There is no contact with the working surface at the right wheel. Manually move the robot to a flat surface and start.
L000 There are no fixed malfunctions in the operation of the device. You can remove the display of this message by restarting the vacuum cleaner.
L001 Right wheel overload detected. Perhaps it is blocked by debris that has fallen on the mechanism. Inspect and brush the item.
L002 An overload signal was detected on the right wheel of the device. Most likely he got dirt, hair, threads. Check item.
L004 The right brush is overloaded during operation. Most likely it is blocked by large debris, threads, hair that has fallen into it.
L008 Malfunctioning left brush caused by overload. An element clogged. Remove debris, dirt, wool or hair to fix the problem.
L010 The cooling system failed, the device overheated. Inspect the cooling system for clogging.
Place for your advertisement. Information about advertising on this site. To read