We have collected all the error codes of iLife vacuum cleaner robots with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.
The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.
Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.
|Error code||Description||Causes and solution|
|1 beep||Defective / locked wheels or cleaning brushes.||Turn off the machine. Inspect the brushes and wheels for clogging or foreign objects blocking their work. Clean them from debris, dirt, threads.|
|2 beeps||One of the altitude or collision sensors has failed.||It is required to clean the sensors with a dry rag or cloth from dust and dirt. Launch the device. If the problem persists, replace the defective items.|
|3 beeps||Locked movement of the device or it is stuck.||You need to manually move the device to a flat work surface and put it into operation. If the error message is not cleared, the problem is with the sensors.|
|4 beeps||No rotation or lockout of the turbo brush.||Most likely, the accumulated debris, hair, threads, wool, dirt impede the optimal operation of the brush. Clean the item from debris.|
|5 beeps||There is no signal about a fixed installed dust collector in the cell.||Make sure the dust bag is installed correctly. Remove and reinstall it.|