Error codes washing machine ARDO

We have collected all the error codes of ARDO washing machine with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.

The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.

Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.

ARDO washing machine errors, decoding

Error code Description Causes and solution
E00, E01 WM does not drain Most often the reason is clogged plum. There may be a problem in the drain pump.
E02 Spinning does not work. As a result of improper filling or draining of water. It is necessary to inspect the drain pump, drain system, water supply.
E03 Washer has not drained the water for some time. Usually 3 min. Possible debris drain system.
F2 Problems with water heating. It is necessary to carry out diagnostics, if necessary, replace the temperature sensor, heating element or module.
F4 Do not drain water from the tank. Check the connection of the drain hose according to the instructions and its location. Also, the drainage pump should be replaced if it breaks.
F5 Simultaneous set and discharge of water. 1. Drain hose incorrectly connected. 2. Filter plug valve discharge. Inspect these items.
F6, F9, F12 The electric motor of the ARDO washing machine is faulty. It is necessary to diagnose, in case of breakage, replace the electric motor.
F8 Exceeding the permissible water level in the tank. Perhaps out of order: 1. Water level sensor. 2. Electric dropping. Check the operation of the pressure switch, the tightness of its pipe, the sensor valve. If broken, replace.
F13, F14 The main board of the electronic module is out of order. An error could occur due to overheating or oxidation of the contacts on the board. A reboot is required to reset the errors. If it does not help, you need to repair or replace the module.