We have collected all the error codes of Atlant washing machine with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.
The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.
Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.
|Error code||Indicators||Description||Causes and solution|
|Sel||None burn||Program selector failure||Check the selector, the controller for performance.|
|None||All are burning||Increased foaming||Reduce the dose of powder or use another, choose another wash program that is more suitable for this type of fabric.|
|F2||The third LED is on.||Temperature sensor malfunction||The sensor is tested and the integrity of the electrical circuits is monitored; The sensor is replaced and the control module is checked.|
|F3||Lights third and fourth||TEN failed||Check the heating element control module.|
|F4||The second indicator is on.||Broken drain pump||Check drain system, pump, filters, control module.|
|F5||The 2nd and 4th LED lights||Inlet valve failed||Check intake system, strainer, water pressure in the system, electronic valve.|
|F6||The glow of the second and third indicator||Malfunction of the reverse relay||Diagnostics and replacement of the relay.|
|F7||Active 2nd, 3rd and 4th.||Power problems||Interference with the power supply is possible.|
|F8||Lights the very first||The tank is full of water||Diagnose the pressure switch and the circuits., The control module, the intake valve.|
|F9||The first and fourth light is on.||Tacho failure||Diagnostics tachogenerator and engine. Replace if damaged.|
|F10||The first and third indicator||Manhole cover not locked||Check and possibly replace the electronic lock.|
|door||1, 3 and 4 light bulbs||Broken lock hatch||Re-close the manhole cover. Replace if broken.|
|F12||1st and 2nd light bulb||Engine failed||Diagnostics of the engine and winding. In the event of a breakdown, replace the engine.|
|F13||The 1st, 2nd and 4th LEDs are lit||Other breakdowns (general error)||Diagnose all electrical circuits and modules.|
|F14||Active first and second||Software failure||Install the new electronic module.|
|F15||-||Leak fixed||Look through the hatch cuff, drain system, tank.|