We have collected all the error codes of Daewoo washing machine with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.
The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.
Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.
| Error code | Description | Causes and solution |
|---|---|---|
| ОЕ | Waste water does not drain. | Inspect the drain pump and system for clogging. Make sure the filter is working. |
| IЕ | Water does not enter the washer. | Check the supply tap and pressure in the water supply system, filter, pressure switch. Diagnose the solenoid valve and circuits. |
| UE | Imbalance during rotation of the drum due to improper loading of things. | Redistribute the laundry in the drum so that it is not crumpled and does not create an imbalance. Check the correct layout of the machine. |
| LE | The door is not tightly closed. | Close the door again, make sure that the lock is working. Perhaps the sunroof lock sensor is out of order. |
| E2 | Water level exceeds permissible maximum; overflow has occurred. | Check the electronic controller and pressure switch for functionality. In case of breakage, install a new element. |
| E4 | Water in the pan. A leak. | Check the washing machine for leaks. |
| E5 | The drum is overloaded. | Reduce the number of things, spread over several washes. |
| E6 | Motor overloaded or jammed. | Diagnostics required. In the event of a breakdown, the installation of a new one is necessary. |
| Е8 | The motor is out of order. | Diagnose the load sensor. If broken, install a new one. |
| Е9 | The water level sensor has failed. | Check pressure switch and branch pipes, electrical circuits. |
| H2 | The temperature sensor has failed. | Make sure the sensor is working. |
| H4 | The temperature sensor has overheated or a short circuit has occurred. | Check the sensor for serviceability. |
| H5 | Water overheats. | Check temperature sensor and heater. |
| H6 | In the heating circuit, an open connection. | Make sure the heater and circuits are in good condition. |
| H8 | Water temperature exceeds the set temperature. | Check the temperature meter and the heater. |
| IB | The control module is broken. | Check module and electrical circuits. |
| PFE | The drainage system is clogged. | Inspect the drain system, pump, and filter for clogging. |