We have collected all the error codes of Haier washing machine with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.
The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.
Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.
| Error code | Description | Causes and solution |
|---|---|---|
| ERR1 | The hatch door is not closed, the program does not start. | Check the operability of the hatch lock, lock. In the event of a breakdown, replacement with a new one is required. |
| ERR2 | Water does not drain for a certain time. | Check the drainage system, hose, filter, pump for blockage. |
| ERR3 | No heating water. | Faulty temperature sensor or heating element. |
| ERR4 | Water does not heat up to the required temperature for a certain time. | Check the heating element for operation. |
| ERR5 | No water entering the washing machine. | Weak pressure in the water supply system. The tap is closed. Damage to the pump. Filter clogged. |
| ERR6 | The control module is malfunctioning. | Control board malfunction, contact oxidation, wiring problems. |
| ERR7 | The electronic unit is out of order. | Oxidation of board contacts, breakdown of the unit itself. |
| ERR8 | Faulty intake system, excess water level. | Check the pressure switch, electronic controller. Replace item if broken. |
| ERR9 | The tank overflowed with water, exceeding the maximum allowable mark. | Diagnostics feed valve, control board, level sensor. |
| ERR10 | An error occurred during water recruitment. | The pressure switch broke. |
| ERR13 | The engine is out of order. | Check the voltage on the winding and the operability of the motor itself. |
| UNB | Imbalance in drum operation during washing. | Redistribute things in the drum evenly or divide into several washings. |
| EUAR | Failure of the electronic board. | Check the electronic unit and its circuits. |
| NO SALT | Increased foaming during washing or lack of powder. | Check the dosage of the detergent. When repeating the error and the correct dosage, use a different powder. |