Error codes washing machine Kaiser

We have collected all the error codes of Kaiser washing machine with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.

The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.

Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.

Kaiser washing machine errors, decoding

Error code	Description	Causes and solution
E01	The loading door is not closed.	Close the door of the loading shaft hatch. Make sure the locking mechanism and lock are operational.
E02	During the allotted time for filling the tank, the water has not reached the required mark.	Perhaps the supply valve is closed, low pressure in the water supply system, breakdown of the pump, valve.
E03	Waste water is not drained for a long time or at all.	It is necessary to inspect the drain system, filters, drain pump, hose. Possible blockage.
E04	Excessive water level.	Check the water level sensor, electronic controller, supply valves can be opened and blocked.
E05	For a long time since the beginning of filling the tank, the level sensor shows a low mark.	Perhaps a low pressure in the water supply system or water does not flow at all, the supply valve does not work. There may be a malfunction in the level meter.
E06	After the pump starts to discharge the waste water, after a certain time, the level meter does not give an empty tank signal.	Check the operation of the drain pump, level sensor. Inspect the drainage system, clogging is possible.
E07	Water leaking into the sump detected.	The level meter could fail and produce incorrect data. Before diagnosing it, inspect the machine for leaks in the pan.
E08	Exceeding permissible power supply parameters.	Faults or interference in the power supply.
E11	The relay for the sunroof locking mechanism is out of order.	Check electronic controller and lock system.
E21	The tachogenerator does not transmit a signal about the movement of the drive motor.	Need diagnostics of the drive motor and tachogenerator. Replace defective items.
E22	The drive motor rotates without a start command.	Failure of the electronic controller. Possible imbalance in the drum.
E31	The temperature meter has closed.	Install a working temperature sensor.
E32	In the circuit of the temperature meter, an open connection.	Check the element and its circuits. If broken, install a new one.
E42	At the end of the wash, the door of the loading shaft hatch is not unlocked.	Damage to the electronic controller or parts of the locking system. Checking and replacing serviceable elements.