Error codes washing machine Leran

We have collected all the error codes of Leran washing machine with a detailed description of the causes of malfunctions, diagnostics and repair. For convenience, arranged in a convenient and understandable table below.

The models with the display show the alphanumeric combination on your display, find it in the table and find out the reason for the error.

Models without a display do not execute the specified program and according to the lit or flashing lights placed on the control panel, you can find out the problem.

Leran washing machine errors, decoding

Error code Description Causes and solution
Error 1 The boot shaft hatch is not locked. Re-close the hatch door. Make sure the lock and locking mechanism are in good condition.
Error 3 The temperature sensor has failed. Check temperature meter. If broken, replace it with a working one.
Error 4 The tubular heater is out of order. It is necessary to check the operation of the heater. Install a working one in case of breakage.
Error 5 No water is collected. Make sure that the tap is open, that the pressure in the water supply system is good, that the filter and pump are working.
Error 6 The electronic control module has failed. Need a diagnosis of the control module, its circuits. Replacement in case of breakage.
Error 7 Faulty control module. Check electronic control module.
Error 8 Excessive water level in the tank detected. Make sure the level sensor is working and there is no leakage.
Error 9 Overflowing water in the pan. Inspect the machine for leaks. If nothing is found, check the water level meter.
UNB Drum imbalance during rotation. Re-arrange things in the drum or divide them into several washings. During rotation, things come together in one pile creating an imbalance.
Place for your advertisement. Information about advertising on this site. To read